Description
Open end wrenches lean back in their own slots, with the size marked in front of each one. List the sizes you actually own, metric or SAE, and the slot widths and lengths are worked out from the size, so you don't have to measure every wrench.
The footprint follows the common 42 mm grid with 7 mm height units. Width is picked automatically from the number of slots, or you can set grid_x yourself. Optional 6 x 2 mm magnet pockets go underneath.
Wrenches from different sets vary a fair bit in thickness. If one doesn't drop in, raise thickness_scale a little or add clearance. lean sets the tilt, 14 degrees by default. Prints right side up without supports.
This model is licensed under
Creative Commons Public Domain
Discussed in
Similar models
gridfinity • tweezers holder • precision screwdriver
gridfinity tray for tweezers and precision screwdrivers
Customize “Wrench Holder Bin for 42 mm Grid Baseplates”
Adjust the parameters, then download your version. Everything renders in your browser.
Rendered locally with OpenSCAD — your settings never leave this page.
Comments