A set of pokeball coasters.

There is one stl file for each color.

The printing is very simple, you just have to put all the models on the printing plate, group them and generate a program for each one. You must print one by one without removing them from the plate.

Don't forget to print the black color at the end and have the z hop activated to prevent the nozzle from colliding with the already printed pieces.

Detailed guide:

The coasters models are designed to be printed in diferent gcodes that are printed one on top of the other. 

For correct printing follow the instructions:

1. Load all the stls of the model to be printed and combine them automatically so that they match each other 

(to make the bulbasaur model, load all the files from the "bulbasaur face coaster" folder and so on with each one.

2. Each piece must be in contact with the print bed.

3. Make a gcode for each color. 

IMPORTANT: each piece except the last one has a height of 0.6, so you must activate a Z hop of 0.8 to 

prevent the nozzle from colliding with the piece of another color. 

4.Print each gcode and at the end without removing the piece, start the gcode you prefer. 

IMPORTANT: the printing order is indifferent, as long as you respect that the file that says "LAST COLOR" in its name is printed last,

 also avoid using skirt or brim as a type of adhesion to the bed.