Description
A desk stand for a phone (with case, up to ~15 mm thick) or a holy card, with a Gothic pointed-arch back and a cut-through Latin cross that glows when there's light behind it. The notch at the apex is a rosary saddle: hang the crucifix behind and let the beads drape in front. A 13 mm slot through the lip plus a floor groove route a charging cable. "AMDG" (Ad Maiorem Dei Gloriam) is engraved on the lip. Source file included if you want to change or remove it.
Dimensions
92 × 84 × 121 mm · plates 5 mm · back angle 68° · ledge 17 mm deep · lip 13 mm
Print settings
FDM: print upright as modelled, no supports (back plate leans 22° from vertical; the cross and saddle tops are short bridges). 0.2 mm layers, 3 walls, 15 % infill, PLA or PETG. Brim recommended for the thin side braces on smooth PEI.
Resin: footprint is larger than most older resin plates; scale to 70 % for a holy-card-only version, or split. Hollow is not needed (5 mm plates).
AI-assisted design: this model was created with AI-assisted parametric CAD (build123d), then checked for watertight, printable geometry. Not yet test-printed; feedback welcome.
This model is licensed under
Creative Commons Attribution-NonCommercial
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Prayer Corner Desk Stand – Phone & Holy Card Stand with Rosary Saddle Entered in Desk Organizers & Stands
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
phone stand • desk organizer • desk tray
Case-Friendly Phone Stand & Desk Tray — Fits Phones in Cases up to 84 mm Wide, No Supports
HomeKitchenChallenge • recipe stand • tablet stand
RecipeRest — Open Tablet, Phone & Recipe-Card Stand, 156 mm Wide
Galaxy Tab S9 FE • tablet stand • S Pen
Folio Tablet Stand for Galaxy Tab S9 FE | Two-Rail Landscape Easel | Pen Rest
Galaxy Z Fold6 • foldable • Samsung
Comments