DESIGN

A threefold botanical sculpture: three fluted, nine-petal candle wells sit in a

softly scalloped tri-lobed base. Each well is framed by an arched crescent shell

with a raised crest vein. A low-relief three-vein rosette joins the composition.

The model is a single integrated part.

NOMINAL DIMENSIONS (millimetres)

Overall X: approximately 143 mm

Overall Y: approximately 146 mm

Overall Z: approximately 34 mm

Number of wells: 3

Nominal well opening: 40.8 mm diameter

Well depth: approximately 17.8 mm

Base floor thickness: 8 mm

FIT NOTE

The nominal opening is 40.8 mm. It is intended for battery-powered LED tealights

with a body diameter no greater than about 40.4 mm. LED tealights vary by brand;

measure your lights and print one test copy before production. Do not force an

oversized light into a well.

PRINTING — ANYCUBIC KOBRA 3 MAX

- Orientation: flat underside on the build plate

- Material: PLA or PETG for LED use

- Layer height: 0.16–0.20 mm

- Perimeters/walls: 3–4

- Infill: 15–20% gyroid or grid

- Top/bottom layers: 5 or more

- Supports: inspect the slicer preview; use build-plate-only/tree supports if

 the crescent-shell undersides are flagged. Keep supports away from the wells.

- Print one sample and check the LED tealight fit before making a batch.

SAFETY

LED TEALIGHTS ONLY. This is a 3D-printed plastic decorative holder, not a

flame-rated candle holder. Never use real wax tealights, wicks, open flames,

incense, or any other hot-burning object in or on this model. Keep away from

heaters and other high-temperature sources.