Description
Grid is a small modular tray system built on a 60 mm grid. Every edge has the same half-bowtie slot underneath, so any two pieces lock together with a little printed key, and you can arrange them however you like.
There are four modules: a long tray for Apple Pencil, a dock that holds the AirPods Pro case upright, a pad for the Apple Watch charger (the watch lies flat on it), and a small valet for an AirTag and keys.
Fits
- Apple Pencil Pro, Apple Pencil 2nd generation and Apple Pencil USB-C (the 1st generation Pencil is too long)
- AirPods Pro 3 and AirPods Pro 2 (USB-C) cases, bare or in a thin skin
- Apple Watch magnetic charger
- AirTag 1st and 2nd generation, plus keys
Printing
Modules in PLA or PETG, printed upright. Keys in PETG, printed flat. 0.2 mm layers, 3 walls, 15% gyroid, no supports. Every module fits a 180 mm bed. The full set is about 12.5 hours and 180 g.
Setup
- Print the key test coupon first if you want to check the fit. The source files let you adjust the key clearance if needed.
- Arrange your modules, then press a key into each pair of facing slots from underneath.
- Seat the Watch charger in its pad and run the cable out through the side notch.
Files
12_grid_modular_desk_all_parts.3mf: every printed part, ready to slicegrid_airpods_dock.stl,grid_key.stl,grid_pencil_tray.stl,grid_valet.stl,grid_watch_pad.stl: the same parts as separate STLsgrid_fit_key.stl,grid_fit_key_coupon.stl: optional fit testsgrid_parametric_source.zip: CadQuery source and STEP files if you want to tweak anything
Part of Contour, my collection of quiet accessories for Apple gear.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-NonCommercial
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Grid Modular Desk Organizer for Apple Gear | Pencil, AirPods Pro, Watch Charger, AirTag
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
AirPods • AirPods Pro 3 • AirPods Pro 2
Pebble AirPods Pro 3 / Pro 2 Charging Dock | Holds Apple MagSafe Charger Flush | Nightstand
AirPods Pro 2 • AirPods • valet tray
Cove Valet Tray for AirPods Pro 2 USB-C | Earbuds & Pocket Dump Tray | Open Source CadQuery
MagSafe • travel • cable organizer
Orbit MagSafe Charger Travel Spool | Cable Winder & Puck Holder for Apple MagSafe Charger
Apple Watch • Apple Watch stand • Series 11
Comments