Description
Halo turns Apple's magnetic Watch charger into a bedside clock. Your watch rests on its side so Nightstand mode kicks in, framed by an open ring. The band ends drop through the ring instead of getting folded flat, and the cable disappears down the back.
The ring is open at the top on purpose. That's what lets the whole thing print upright without supports.
Fits
- Apple Watch Series 11, SE 3 and Ultra 3
- Earlier models that use the same magnetic charger (Series 4 and later, Ultra 1 and 2)
- Thin bumpers are fine. Solo Loop style bands hang behind the hub rather than wrapping around it.
You'll need
- Apple Watch Magnetic Fast Charger to USB-C Cable (the one that comes with Series 11)
- Have the older, thicker white plastic puck? Use the included variant for it.
- Four 10 mm bumper pads (optional)
Printing
PETG or PLA, upright on its base. 0.2 mm layers, 3 walls, 25% gyroid, no supports. About 6 hours and 73 g.
Setup
- Print one of the small fit rings first if you want to check the grip. The source files let you loosen or tighten it if needed.
- Lay the cable into the slot under the hub and push it through the slit in the spoke to the back.
- Press the charger into the hub, charging face out.
- Clip the cable into the channel down the back and along the base.
Files
halo_stand.stl: the main printhalo_fit_ring_m010.stl,halo_fit_ring_p010.stl,halo_fit_ring_p025.stl: optional fit testshalo_stand_older_white_plastic_puck.stl: variant for the older, thicker white plastic Watch chargerhalo_parametric_source.zip: CadQuery source and STEP files if you want to tweak anything
Part of Contour, my collection of quiet accessories for Apple gear.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-NonCommercial
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Halo Apple Watch Charging Stand | Series 11, SE 3, Ultra 3 & Earlier | Nightstand Mode
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
MagSafe • iPhone stand • iPhone 17
Arc MagSafe Charging Stand for iPhone 12-18 | Holds Apple 25W MagSafe Charger | StandBy Mode
MagSafe • travel • cable organizer
Orbit MagSafe Charger Travel Spool | Cable Winder & Puck Holder for Apple MagSafe Charger
desk organizer • modular • Apple Pencil
Grid Modular Desk Organizer for Apple Gear | Pencil, AirPods Pro, Watch Charger, AirTag
phone stand • iPhone stand • iPhone 16e
Cradle iPhone Stand with USB-C Pass-Through | iPhone 15-18, 16e, 17e & Air | Thick Cases OK
test print • tolerance test • skadis
Comments