Description
Not every iPhone or case does MagSafe, and plenty of people still charge with a cable. Cradle holds any iPhone, bare or in a case up to 13 mm thick, and the front column has a slot so the USB-C plug drops straight through and the cable runs out under the arch.
Works in portrait or landscape, and prints on its side with no supports.
Fits
- iPhone 15, 16, 16e, 17, 17e, iPhone Air, 18 Pro and Pro Max
- Older Lightning iPhones sit fine too
Printing
PETG or PLA, on its side with the profile flat. 0.2 mm layers, 4 walls, 20% gyroid, no supports. About 8.5 hours and 114 g.
Setup
- Add four 8 mm bumpers underneath if you like.
- To charge in portrait, plug the cable into your phone first, drop the cable through the slot, then set the phone on the ledge.
Extra chunky USB-C plugs might not fit through the slot.
Files
cradle_stand.stl: the main printcradle_parametric_source.zip: CadQuery source and STEP files if you want to tweak anything
Part of Contour, my collection of quiet accessories for Apple gear.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-NonCommercial
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Cradle iPhone Stand with USB-C Pass-Through | iPhone 15-18, 16e, 17e & Air | Thick Cases OK
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
MagSafe • iPhone stand • iPhone 17
Arc MagSafe Charging Stand for iPhone 12-18 | Holds Apple 25W MagSafe Charger | StandBy Mode
MagSafe • travel • cable organizer
Orbit MagSafe Charger Travel Spool | Cable Winder & Puck Holder for Apple MagSafe Charger
iPad stand • iPad A16 • iPad Air
Easel iPad Stand with Apple Pencil Holder | iPad, Air, Pro & mini | USB-C Pass-Through
phone stand • desk organizer • desk tray
Comments