Description
Easel is drawn as one continuous line: a groove for your Apple Pencil, a deep ledge, a backrest leaning back 20 degrees, and a rear strut that leaves a big triangular window. It prints on its side, so the layers follow the shape and it ends up stiff exactly where it needs to be.
The ledge is deep enough for most cases, and there's a slot so you can charge in portrait with the cable running out underneath.
Fits
- iPad (A16), iPad Air 11 and 13 inch, iPad Pro 11 and 13 inch, iPad mini
- Bare or in a case up to 15 mm thick (folio and keyboard cases folded behind won't sit right)
- Any Apple Pencil in the front groove
Printing
PETG or PLA, on its side with the profile flat on the bed. 0.2 mm layers, 4 walls, 20% gyroid, no supports. It's a big one: around 23 hours and 297 g.
Setup
- Stick 10 mm bumpers into the recesses on the base, ledge and backrest to protect your iPad's finish (optional, but nice).
- To charge in portrait, plug the cable into the iPad first, then drop it through the slot in the ledge and run it out under the base.
Very chunky USB-C plugs may not fit through the slot.
Files
easel_stand.stl: the main printeasel_parametric_source.zip: CadQuery source and STEP files if you want to tweak anything
Part of Contour, my collection of quiet accessories for Apple gear.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-NonCommercial
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Easel iPad Stand with Apple Pencil Holder | iPad, Air, Pro & mini | USB-C Pass-Through
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
iPad A16 • iPad • iPad stand
Draft iPad A16 Drawing Stand | 18 Degree Deck with Pencil Groove | Open Source CadQuery
Apple Pencil Pro • Apple Pencil • stylus holder
Line Apple Pencil Pro Desk Rest | Open Channel with Lift-Out Scoop | Open Source CadQuery
phone stand • iPhone stand • iPhone 16e
Cradle iPhone Stand with USB-C Pass-Through | iPhone 15-18, 16e, 17e & Air | Thick Cases OK
iPhone 17 • iPhone 16 • iPhone stand
Comments