Description
Arc is a triangle-shaped desk easel for the base iPhone 17 and iPhone 16. The phone leans back on the big flat face and sits on a front ledge that's split down the middle, so the charging cable drops straight through. The sides are open, which keeps it light, and it works in portrait or landscape.
Fits
- iPhone 17 and iPhone 16, base models
- Bare, or in a case as long as phone plus case stays under 10 mm thick
- Camera bumps and case shapes aren't modeled, so have a look with your own setup
You'll need
- Optional: 1 mm silicone tape, two 20 x 6 mm strips for the back face and ledge
- Optional: four 8 x 1 mm rubber feet, there are shallow recesses underneath for them
Printing
PETG, 0.4 mm nozzle, 0.2 mm layers, 4 walls, 20% gyroid, 5 top and bottom layers. The STL is already lying on its side, which is how it should print. The cable gap may need a short bridge or a bit of local support there, depending on how your printer handles bridges.
Setup
- Add the tape and feet if you're using them.
- Run the cable through the center gap first, then set the phone on the ledge.
- It's an easel, not a clamp, so steady the phone when you tap on it.
Make it yours
The values that shape it live in presets/default.json:
- view_angle_deg: how upright the phone sits (70 by default)
- cable_channel: width of the cable gap
- width: overall width of the easel
To rebuild, unzip the source and from that folder run pip install -r source/requirements.txt, then python source/build.py --no-render. Pass your own preset file as the first argument to override the defaults, and fresh STL, STEP and 3MF files land right next to the source.
Files
arc_iphone_easel.stl: the easelarc_source.zip: CadQuery source, presets and STEP files
Part of Tideline, my open source set of twelve Apple desk and travel prints. It's CC BY-SA, so fork it, fix it and keep your remix open too.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-ShareAlike
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Arc Desk Easel for iPhone 17 & 16 | Open Triangle Stand with Cable Gap | Open Source CadQuery
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
iPhone 17 • iPhone 16 • wall mount
Ledge Wall Shelf for iPhone 17 & iPhone 16 | Screw-Mount Charging Spot | Open Source CadQuery
iPad stand • iPad A16 • iPad Air
Easel iPad Stand with Apple Pencil Holder | iPad, Air, Pro & mini | USB-C Pass-Through
Apple Pencil Pro • Apple Pencil • stylus holder
Line Apple Pencil Pro Desk Rest | Open Channel with Lift-Out Scoop | Open Source CadQuery
MagSafe • iPhone stand • iPhone 17
Comments