Description
Ledge is a small wall shelf for the base iPhone 17 and iPhone 16. It screws to the wall, the phone stands in it leaning on the backplate, and there's an open slot in the floor so the charging cable comes up from below. Good by the bed, over the workbench or next to the front door.
Fits
- iPhone 17 and iPhone 16, base models
- Bare or in a case up to 78 mm wide and 12 mm thick
You'll need
- Two 4 mm pan-head screws with heads no wider than 9 mm (4 x 30 mm wood screws are about right)
- Wall anchors that suit your wall. The holes are 64 mm apart
Printing
PETG, 0.4 mm nozzle, 0.2 mm layers, 4 walls, 20% gyroid, 5 top and bottom layers. Since it hangs on a wall I'd bump it to 5 walls and 30% infill. The STL is already backplate down. Add local supports under the front lip.
Setup
- Mark the holes, drill, fit the anchors and screw the shelf to the wall.
- Feed the cable up through the slot, plug in and drop the phone in.
- Indoors only, and not above anything fragile or anyone's head.
Make it yours
back_heightandshelf_depth: size of the backplate and how far the shelf sticks outscrew_spacingandscrew_clearance: hole spacing and diameter, handy if you're reusing old holescable_channel: width of the cable slotwidth: overall width
To rebuild, unzip the source and from that folder run pip install -r source/requirements.txt, then python source/build.py --no-render. Pass your own preset file as the first argument to override the defaults, and fresh STL, STEP and 3MF files land right next to the source.
Files
ledge_iphone_wall_shelf.stl: the shelfledge_source.zip: CadQuery source, presets and STEP files
Part of Tideline, my open source set of twelve Apple desk and travel prints. It's CC BY-SA, so fork it, fix it and keep your remix open too.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-ShareAlike
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Ledge Wall Shelf for iPhone 17 & iPhone 16 | Screw-Mount Charging Spot | Open Source CadQuery
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
iPhone 17 • iPhone 16 • iPhone stand
Arc Desk Easel for iPhone 17 & 16 | Open Triangle Stand with Cable Gap | Open Source CadQuery
Galaxy A16 • Samsung • Android
Cove Wall Phone Holder for Galaxy A16 5G | Open-Front Charging Pocket | Screw Mount
phone stand • iPhone stand • iPhone 16e
Cradle iPhone Stand with USB-C Pass-Through | iPhone 15-18, 16e, 17e & Air | Thick Cases OK
phone stand • desk organizer • desk tray
Comments