Description
Spool is a travel reel for the original MagSafe charger. The puck sits in a pocket on top, the cable winds around the hub underneath, and a notch in the rim lets it out. The top flange flares out at 45 degrees, so the whole thing prints without supports.
Fits
- The original MagSafe Charger, model A2140 (2020, 1 m cable)
- Not the newer A2580 or A3250
You'll need
- A soft hook-and-loop cable tie, about 150 x 12 mm, to keep it wound
Printing
PETG, 0.4 mm nozzle, 0.2 mm layers, 4 walls, 20% gyroid, 5 top and bottom layers. Flat on the bed, no supports.
Ring gauges are included: one, two and three dots are 0.2, 0.4 and 0.6 mm per side. The default is 0.4.
Setup
- Unplug the charger first.
- Seat the puck in the pocket. It sits a little proud on purpose, the pocket is 4.6 mm deep and the puck is 5.3 mm.
- Run the cable out through the notch, wind it loosely around the hub and wrap the tie around the reel.
It's for storage, not for charging while it's wound up.
Make it yours
puck_diameter,clearance_per_sideandpocket_depth: the puck pockethub_radius,flange_radiusandwinding_height: how much cable it holdsexit_width: the cable notch
To rebuild, unzip the source and from that folder run pip install -r source/requirements.txt, then python source/build.py --no-render. Pass your own preset file as the first argument to override the defaults, and fresh STL, STEP and 3MF files land right next to the source.
Files
spool_magsafe_reel.stl: the reelspool_ring_test_0.2mm.stl,spool_ring_test_0.4mm.stl,spool_ring_test_0.6mm.stl: fit test couponsspool_source.zip: CadQuery source, presets and STEP files
Part of Tideline, my open source set of twelve Apple desk and travel prints. It's CC BY-SA, so fork it, fix it and keep your remix open too.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-ShareAlike
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Spool MagSafe Charger Travel Reel for A2140 | Cable Winder with Puck Pocket | Open Source CadQuery
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
MagSafe • travel • cable organizer
Orbit MagSafe Charger Travel Spool | Cable Winder & Puck Holder for Apple MagSafe Charger
MagSafe • iPhone stand • iPhone 17
Arc MagSafe Charging Stand for iPhone 12-18 | Holds Apple 25W MagSafe Charger | StandBy Mode
Apple Pencil Pro • Apple Pencil • pencil case
Transit Apple Pencil Pro Travel Case | Two-Shell Capsule with Elastic Bands | Open Source CadQuery
Moto G • Motorola • cable organizer
Loop USB-C Cable Travel Reel | Moto G 2025 Charging Cable Organizer | No Supports
Galaxy Tab S9 FE • tablet stand • S Pen
Comments