Description
Orbit is a little bedside rest for the Galaxy Watch7. The watch lies across two open rails with the sensor hanging over the gap in the middle, so nothing presses on the back and the strap can just fall open.
Fits
- Galaxy Watch7, 40 mm and 44 mm
- Soft straps up to 24 mm wide
- Not for rigid metal bracelets or the Watch Ultra. It isn't a charger and doesn't hold the charging puck
You'll need
- Two thin felt strips for the tops of the rails
Printing
PETG, 0.2 mm layers, 4 walls, 25% gyroid. Base down, with supports under the ends of the two arches.
Setup
- Stick the felt strips on top of the rails.
- Unbuckle the strap and lay the watch face up across both rails, with the sensor centered over the gap.
Files
orbit_watch_rest.stl: the restorbit_clearance_gauge.stl: quick tolerance test with 10.2, 10.4 and 10.6 mm slots. Slide a 10 mm rod or drill bit through to see how snug your printer runsorbit_source.zip: CadQuery source, preset and STEP files. Rebuild withpython source/model.py presets/default.json
Part of my Android desk set, twelve simple prints for Android phones and the gear around them. Remixes welcome!
Not made by or affiliated with any of the brands mentioned. Model names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-NonCommercial
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Orbit Galaxy Watch7 Stand | Open Rest for 40 mm & 44 mm | Nightstand Watch Holder
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
AirTag • AirTag holder • AirTag case
Orbit AirTag Holder with Screw-Down Lid | Lanyard Tag Enclosure, M3 Hardware | Open Source CadQuery
USB-C hub • hub stand • hub holder
Port Ventilated USB-C Hub Stand | Strap-Mount Hub Bridge | Desk Cable Management
Galaxy Z Fold6 • foldable • Samsung
Span Stand for Galaxy Z Fold6, Fully Open | Hinge-Free Support | Desk Cradle
MagSafe • travel • cable organizer
Comments