Description
Orbit is a screw-closed AirTag holder with a lanyard tab. The tag sits in a round pocket, a flat lid with a window goes on top, and two M3 screws pull everything together into nuts captured underneath, so nothing pops out by accident. Loop a cord through the tab and hang it off a bag, keys or a camera strap.
Fits
- AirTag (1st generation, 2021)
- The 2nd generation (2026) is listed at the same size, but check the fit before trusting it with one
You'll need
- Two M3 pan-head screws, 12 or 14 mm long (14 pokes out about half a millimeter past the nuts)
- Two M3 hex nuts, 5.5 mm across flats and 2.4 mm thick
- A 2 to 3 mm cord for the tab
Printing
PETG, 0.4 mm nozzle, 0.2 mm layers, 4 walls, 20% gyroid, 5 top and bottom layers. Both parts flat on the bed, no supports.
Print the ring gauges first: one, two and three dots are 0.2, 0.4 and 0.6 mm of clearance around the tag. The default is 0.5.
Setup
- Press the nuts into the hex pockets on the underside.
- Drop the AirTag in, put the lid on and tighten the screws gently.
- Thread the cord through the tab.
There's a coin cell inside, so keep it away from small kids, and only use it to keep track of your own stuff.
Make it yours
clearance_per_sideandaxial_clearance: fit around the tagwall,floorandlid_thickness: how chunky it islug_spacingandscrew_clearance: screw positions and hole size, if you want different hardware
To rebuild, unzip the source and from that folder run pip install -r source/requirements.txt, then python source/build.py --no-render. Pass your own preset file as the first argument to override the defaults, and fresh STL, STEP and 3MF files land right next to the source.
Files
orbit_airtag_holder.3mf: body and lid on one plate, ready to sliceorbit_body.stl,orbit_lid.stl: the same parts as separate STLsorbit_ring_test_0.2mm.stl,orbit_ring_test_0.4mm.stl,orbit_ring_test_0.6mm.stl: fit test couponsorbit_source.zip: CadQuery source, presets and STEP files
Part of Tideline, my open source set of twelve Apple desk and travel prints. It's CC BY-SA, so fork it, fix it and keep your remix open too.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-ShareAlike
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Orbit AirTag Holder with Screw-Down Lid | Lanyard Tag Enclosure, M3 Hardware | Open Source CadQuery
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
AirTag • AirTag 2 • bike
Stash Hidden AirTag Bike Mount | Fits Under Standard Bottle Cages | AirTag 1st & 2nd Gen
Galaxy Watch7 • smartwatch stand • watch holder
Orbit Galaxy Watch7 Stand | Open Rest for 40 mm & 44 mm | Nightstand Watch Holder
AirTag • AirTag 2 • AirTag holder
Comments