Description
Round puck that holds six microSD cards. The lid has one window, so you spin it to the card you want and lift that one out with the finger notch. The other five stay covered.
Each pocket is 11.6 x 15.6 mm for a standard 11 x 15 mm card, and there's a small recess under the contacts so they aren't resting on plastic. Load them label up.
Putting it together:
- Press an M3 nut into the hex pocket on the bottom.
- Stack the disc, the 0.5 mm spacer and the lid.
- Add a small washer and an M3x10 pan head screw. Snug it until the lid turns freely but doesn't lift.
The spacer is thin on purpose. Print it at 0.16 or 0.2 mm layers and measure it before assembly. Plain PLA or PETG, nothing with carbon or metal in it. There are also three sample pockets in the files, from 0.2 mm per side up to 0.4.
No click stops, it just turns. Since the window is always open it's a desk thing, not something to throw loose in a bag. Pocket sizes are from the card spec, so look at the fit before trusting it with anything important.
This model is licensed under
Creative Commons Public Domain
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Discussed in
Similar models
gridfinity • microsd • sd card holder
Gridfinity microSD and SD Card Tray with Parts Bins (3x2)
cable organizer • SD card holder
Snap-In 5-Channel Cable Organizer & USB/SD Card Dock — No Supports, One Piece
AirTag • AirTag holder • AirTag case
Comments