Description
What it is
One printed piece that holds five USB-C / PD cables in spring-loaded V channels and keeps flash drives and memory cards standing behind them. Each channel is a pair of 1.2 mm blades: 6.5 mm clear at the seat and 4.6 mm at the throat, so a 4 mm cable is held lightly and a 6 mm braided cable firmly, and a cable has to be lifted deliberately to come out. Behind the cables: 2 USB-A wells, 2 SD slots, 4 microSD slots and an adapter tray. No glue, no screws, no magnets.
Dimensions (mm)
115 x 62 x 26 overall. Base 6 thick, 5 mm corner radius. Dock block 111 x 30, 20 tall, 5.7 deg draft. Blades 23 above the bed. Channel pitch 12.5. USB-A 13.4 x 5.6 x 13 deep. SD 25.4 x 3.4 x 11. microSD 11.6 x 1.9 x 6. Tray 33 x 13 x 5. Clearance 0.3 to 0.7 mm per side.
Print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 3 perimeters, 4 top and bottom layers, 20 percent gyroid infill, no supports, no brim. About 128 g and 5 to 7 h. Print exactly as it lies, base on the bed.
Check
Independent re-parse of the exported STL: closed 2-manifold, single body, genus 0, positive volume, 0 degenerate triangles, one flat 7,108 mm2 face on Z = 0, 0 downward-facing surface steeper than 45 deg, steepest draft 11 deg.
AI-assisted CAD
Generated parametrically in Python and verified with a separate checker. Original design, no remix, no trademarks.
File
cable-usb-dock.zip holds cable-usb-dock.stl (binary STL, mm).
This model is licensed under
Creative Commons Attribution-NonCommercial-ShareAlike
Snap-In 5-Channel Cable Organizer & USB/SD Card Dock — No Supports, One Piece Entered in Desk Organizers & Stands
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
cable guide • cable management • desk
Cable Quay — Five-Channel Open Cable Guide
cable organizer • cable management • desk
Rill Weighted Desk Cable Organizer | Four Channels for USB-C Cables | Hidden Washer Ballast
USB-C hub • hub stand • hub holder
Comments