Description
Dovetail rail that screws to the wall, with two modules that slide on from the end. One is a saddle for a headband or a bundle of cables. The other is a small tray, about 65 x 50 mm inside, for USB dongles and adapters. The orange end stops lock everything in place.
In the files
- wall rail, 170 mm long, screw holes 130 mm apart
- saddle module
- tray module
- left and right end stops
- dovetail test pieces at 0.2, 0.3 and 0.4 mm, plus a key
Print the test pieces first. Dovetails are fussy and the right clearance depends on your printer.
To mount it you need two #8 x 1.5" pan head screws with washers, going into a stud or other solid backing with at least 20 mm of bite. Each end stop takes an M3x55 screw, a nut and two washers. Leave about 100 mm of clear space at one end so the modules can slide on.
The rail prints flat on its back. The modules and end stops may need some support under the overhangs depending on how you lay them out.
There's no weight rating on any of this yet. Hang a test weight on it before trusting it with a headset.
This model is licensed under
Creative Commons Public Domain
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Discussed in
Similar models
headset stand • headphone stand • gaming headset
Headset Stand with Wide Saddle and Tray
cable • cable management • functional
CablePilot | Modular Extendable Cable Retrieval Tool (630 mm)
Moto G • Motorola • cable organizer
Comments