Description
Recommended Slicer Settings:
- Layer Height: 0.16mm
- Initial Layer Height: 0.2mm
- Line Width (Initial Layer): 0.55mm
- Elephant Foot Compensation: 0.1mm
- Precise Z Height: Enabled
- Wall Order: Outer → Inner
- Wall Loops: 6
- Infill Density: 20%
- Infill Pattern: Gyroid
- Initial Layer Speed: 25mm/s
- Infill Speed: 80mm/s
- Seam Alignment: Aligned or Back (Paint the seam at the back of the model for a clean finish.)
- Heat Bed Temperature: 50°C (for PLA/PLA+ to prevent elephant foot)
Model Size:
📏 4x4cm
Clone the objects to minimize material waste
⚠ Please note: If you scale the model, you may need to add supports for proper printing.
Personal use only
Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to 👉 patreon.com/c/BOXEDABLES
Copyright Protected Files
Your purchase does not give you the right to sell or distribute the digital files in any way.
If you have any questions, feel free to ask. Happy printing! 😊
Category
Art
Comments
0/800
Similar Models
1339
491
3770
1138
mask • decor • decoration
Caricature-Style Laughing Cat Mask – 3D Printable STL (Adult & Kid Sizes)
353
529
347
