Infill Percentage Sheet For Clear Use
Uploaded on September 02, 2026
Print Profiles
+Show Print ProfilesDescription
Infill Percentage Reference Sheet
Stop guessing how dense your internal structures will be and keep a physical reference next to your printer.
PATTERN CAN BE CHANGED IN SLICER!
📏 Densities Included
This single-print model showcases six different infill percentages:
- 5%
- 10%
- 15%
- 25%
- 50%
- 75%
⚙️ Print Settings & Profile
- Ready-to-Print: The included
.3mffile is fully pre-configured. It uses six specific modifier blocks to automatically apply the correct infill percentages to each section. - Exposed Internals: The top shell layers have been deliberately removed in the slicer profile so the infill structure remains permanently visible for reference.
- High Contrast Text: The profile allows for a quick AMS color change (or manual filament swap) for the embossed text, making the numbers pop.
Category
3d printer
Comments
0/800
Similar Models
1268
1075
1474
5645
4337
899
