Description
Hooks into two slots on a slotted pegboard and holds a cup that turns all the way around on a pin. It's handy for pens, brushes, screwdrivers or anything else you want to grab from either side.
The cup can be round, square or hex, with one to four compartments. Hook spacing, board thickness, hook width and the distance to the next row of slots can all be adjusted, so measure your board before you print. The lower peg drops into the row below and keeps the bracket from rocking.
Print orientation is already set in the files: bracket upside down, pin standing, cup open side up. None of them need supports. If you don't want to print the pin, an 8 mm dowel or an M8 bolt does the same job.
This model is licensed under
Creative Commons Public Domain
Discussed in
Similar models
openscad • parametric • customizable
A_small_desk_organizer_cup_for_pens_and_pencils_about_80_mm
wrench holder • tool storage • workshop
Wrench Holder Bin for 42 mm Grid Baseplates
Customize “Swiveling Cup for Slotted Pegboard”
Adjust the parameters, then download your version. Everything renders in your browser.
Rendered locally with OpenSCAD — your settings never leave this page.
Comments