Description
How it works
Many rainforest leaves, most famously the sacred fig (Ficus religiosa), end in a long drip tip that channels rain off the leaf so the surface dries quickly and doesn't grow mould. This dish copies that structure:
1. Pinnate vein ribs lift the soap off the floor so it touches only thin lines and dries.
2. The floor slopes toward the tip (6.5 mm → 2.0 mm over 158 mm, ≈1.7°).
3. A perimeter gutter and an open midrib channel collect water and lead it to the tip.
4. The drip tip extends past the body; let it overhang the sink edge and water falls away instead of pooling under the soap – the same job the tip does on a leaf.
Dimensions
158 × 84 × 14 mm · wall 2.4 mm · ribs 2.2 mm wide · soap rests 3.5 mm below the rim
Print settings
FDM: prints flat as modelled, no supports, 0.2 mm layers, 3 walls, 4 top/bottom layers, 15 % infill. PETG or ASA for wet use (PLA works but can deform in hot showers). Contacts water and soap, not food. Rinse occasionally; not dishwasher-rated.
Resin: too long for most older resin plates; scale to 75 % for a small-bar / guest-soap version, or print in tough/ABS-like resin, flat with 20° tilt, drain holes not needed (open top).
AI-assisted design: this model was created with AI-assisted parametric CAD (build123d), then checked for watertight, printable geometry. Not yet test-printed; feedback welcome.
This model is licensed under
Creative Commons Attribution-NonCommercial
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Drip-Tip Leaf Soap Dish – Self-Draining, Biomimetic Entered in Home & Kitchen
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
HomeKitchenChallenge • sponge holder • sink organiser
FlowDock — Open Sponge Rest & Draining Tray, 124 × 99 mm
HomeKitchenChallenge • drying rack • draining tray
DryNest — Open-Bar Draining Tray for Sponges & Small Items
cable grommet • tv mount • drywall
Comments