Description
Keep your phone visible during calls while charging cables and small accessories have their own space. The two uprights leave the centre open and the front tray catches an earbud case or adapters.
Overall dimensions: 150 × 126 × 110 mm.
Cradle: two 18 mm-wide supports, 54 mm apart at their inner edges; 17 mm horizontal seat depth, 7 mm retaining lips and a 65.8° backrest. Start with phones about 70–95 mm wide and cases no thicker than 12 mm; check the device against these clear dimensions. This is a gravity cradle, not a clamp. The centre has about 25 mm of clearance below the seat; connector size and bend radius still matter.
Material: PLA for a dry, room-temperature desk; PETG is also suitable.
Print at 100% in millimetres, flat base down in the supplied orientation. Suggested starting settings: 0.4 mm nozzle, 0.20 mm layers, 4 walls, 5 top/bottom layers and 15–20% infill. Designed for printing without supports; inspect the slicer preview and use the filament maker’s profile. No assembly, moving joints or precision fits. Images are CAD renders of the supplied model; illustrated accessories are not included. AI-assisted original CAD.
Concept inspiration: Modern Desk Phone Stand by KL Worx on MakerWorld, reviewed through its indexed listing. Two separate structural ribs, a 54 mm central opening and a forward catch tray. No pad sockets, charger attachment or copied geometry. Reference: https://makerworld.com/en/models/2438331-modern-desk-phone-stand
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
CallCove — Phone Dock with Open Charging Access & Catch Tray
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
desk organizer • phone stand • cable guide
Desk Harbor — Phone Rest, Catch-All Tray & 3 Cable Guides
phone stand • desk organizer • desk tray
Case-Friendly Phone Stand & Desk Tray — Fits Phones in Cases up to 84 mm Wide, No Supports
Galaxy Z Fold6 • foldable • Samsung
Comments