Description
Lift is a pair of wedge rails that tip a MacBook Air up into a gentler typing angle and give it some air underneath. Two small pieces instead of one big stand, so they print quickly and slip into a laptop sleeve.
Fits
- MacBook Air 13 inch, M4 (2025) and M5 (2026), bare
You'll need
- Four 145 x 12 x 1 mm silicone strips, one on top and one underneath each rail
Printing
PETG, 0.4 mm nozzle, 0.2 mm layers, 4 walls, 20% gyroid, 5 top and bottom layers. I'd use 5 walls and 30% infill here since they carry the laptop. Both rails are already flat on their sides and need no supports. They're the same shape, the 3MF just puts both on one plate.
Setup
- Stick the strips on.
- Set the rails about 220 mm apart, center to center, with the low ends and their little stops toward you.
- Rest the laptop behind both stops, keeping its own feet clear of the rails, and check it doesn't rock and the lid opens freely.
- Use it on a level desk.
Make it yours
front_heightandrear_height: these set the angle (12 and 37 mm by default, roughly 8 degrees)rail_lengthandrail_width: size of each railrail_spacingonly places them in the preview, so set them out however suits your laptop
To rebuild, unzip the source and from that folder run pip install -r source/requirements.txt, then python source/build.py --no-render. Pass your own preset file as the first argument to override the defaults, and fresh STL, STEP and 3MF files land right next to the source.
Files
lift_riser_rails.3mf: both rails on one plate, ready to slicelift_left_rail.stl,lift_right_rail.stl: the same parts as separate STLslift_source.zip: CadQuery source, presets and STEP files
Part of Tideline, my open source set of twelve Apple desk and travel prints. It's CC BY-SA, so fork it, fix it and keep your remix open too.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-ShareAlike
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Lift Riser Rails for MacBook Air 13 | Two-Piece Laptop Typing Ramp | Open Source CadQuery
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
MacBook Air • MacBook stand • vertical laptop stand
Fin Vertical Stand for MacBook Air 13 M4 & M5 | Lined Slot Laptop Cradle | Open Source CadQuery
Apple Pencil Pro • Apple Pencil • stylus holder
Line Apple Pencil Pro Desk Rest | Open Channel with Lift-Out Scoop | Open Source CadQuery
MacBook stand • vertical laptop stand • MacBook Air
Slate Vertical MacBook Stand | MacBook Neo, Air 13/15, Pro 14/16 | Swappable TPU Liners
Apple Pencil Pro • Apple Pencil • pencil case
Transit Apple Pencil Pro Travel Case | Two-Shell Capsule with Elastic Bands | Open Source CadQuery
cable • cable management • functional
Comments