Description
Fin keeps a closed MacBook Air standing on its edge, so it takes up a sliver of desk instead of a whole corner. Two sloped jaws form a slot that's open at both ends, which keeps the ports reachable and lets cables run straight out the sides.
Fits
- MacBook Air 13 inch, M4 (2025) and M5 (2026), closed and bare
- No hard-shell cases
You'll need
- 1 mm silicone or felt liner: two 90 x 30 mm pieces for the jaws and one 90 x 10 mm piece for the floor. The fit counts on these, so they're not optional
- Optional: four 8 x 1 mm rubber feet
Printing
PETG, 0.4 mm nozzle, 0.2 mm layers, 4 walls, 20% gyroid, 5 top and bottom layers. Flat on the bed, no supports.
Print the slot coupons first. One, two and three dots mean 0.2, 0.4 and 0.6 mm of clearance per side. They already allow for the 1 mm liners, so try them with liner stuck in. The cradle defaults to 0.4.
Setup
- Stick the liners to both jaws and the floor of the slot.
- Lower the laptop in hinge edge first, ports toward the open ends.
- A hard tug on a cable can tip it, so leave a bit of slack.
Make it yours
clearance_per_side: set it to whichever coupon felt rightliner_thickness: if your liner isn't 1 mmdevice_depth: closed thickness of the laptop, if you want to adapt it to another machinejaw_height: how tall the jaws are
The coupons rebuild with the same numbers, so you can test a new fit before printing the whole thing.
To rebuild, unzip the source and from that folder run pip install -r source/requirements.txt, then python source/build.py --no-render. Pass your own preset file as the first argument to override the defaults, and fresh STL, STEP and 3MF files land right next to the source.
Files
fin_macbook_cradle.stl: the cradlefin_slot_test_0.2mm.stl,fin_slot_test_0.4mm.stl,fin_slot_test_0.6mm.stl: fit test couponsfin_source.zip: CadQuery source, presets and STEP files
Part of Tideline, my open source set of twelve Apple desk and travel prints. It's CC BY-SA, so fork it, fix it and keep your remix open too.
Not made by or affiliated with Apple. Product names are only here to say what it fits.
This model is licensed under
Creative Commons Attribution-ShareAlike
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Fin Vertical Stand for MacBook Air 13 M4 & M5 | Lined Slot Laptop Cradle | Open Source CadQuery
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
laptop stand • MacBook stand • laptop riser
Wing Laptop Stand Fins | MacBook Neo, Air 13/15, Pro 14/16 | 17° Ergonomic Riser, No Supports
MacBook stand • vertical laptop stand • MacBook Air
Slate Vertical MacBook Stand | MacBook Neo, Air 13/15, Pro 14/16 | Swappable TPU Liners
MacBook Air • laptop riser • laptop stand
Lift Riser Rails for MacBook Air 13 | Two-Piece Laptop Typing Ramp | Open Source CadQuery
Mac mini • Mac mini M4 • Mac mini M6
Comments