Description
PeelPilot is a compact, blade-free prototype for starting a sticker or label corner. Three blunt tongues offer nominal tip thicknesses of 0.8, 1.0 and 1.3 mm. Lift gently, then continue peeling by hand.
Prototype status: digital geometry checks only. This model has not been physically printed or tested. Label-release performance and tip durability remain unverified; some thin labels may be unsuitable. Images are illustrative product renders and CAD views, not photographs of physical prints. Small surface details in the product render may differ; use the CAD views and supplied files for exact geometry.
Files and dimensions
One printable STL, an editable STEP solid, digital validation notes and a print-test checklist are included in the ZIP. Units: millimetres. Overall size: 101 x 24 x 9.7 mm.
Suggested starting settings
PLA or PETG, 0.4 mm nozzle, 0.16-0.20 mm layers, 4 walls and 20% infill. Place the broad underside flat on the bed. Supports are not intended, but inspect the full slicer preview and confirm all three tips are preserved. These are starting settings, not a tested print profile.
Use
No assembly is required. Remove printed burrs, choose a tip and try it gently at a label corner. Do not force it under a strongly bonded label. Stop using a cracked tip.
AI assistance: concept development, CAD, digital checks and listing text were prepared with AI assistance. No physical testing is claimed.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
Discussed in
Similar models
FunctionalPrintsChallenge • glue spreader • craft tool
GlueWing — Smooth & Notched Glue Spreader with Raised Grip
cable • cable management • functional
CablePilot | Modular Extendable Cable Retrieval Tool (630 mm)
HomeKitchenChallenge • tea organiser • sachet holder
SachetSteps — Three-Tier Wrapped Tea & Sachet Organiser
FunctionalPrintsChallenge • parts tray • sorting tray
Comments