Description
Make small wrapped packets easier to see and reach. SachetSteps has three open pockets with progressively raised floors, so the back rows sit higher. Scalloped front edges provide finger access without moving trays, sliding tracks or matching components.
Overall size: 112 × 106 × 77 mm. Each pocket is approximately 104 mm wide and 30 mm deep inside. The floor rises by 10 mm from one tier to the next. Store wrapped tea bags, condiment sachets or similar packets that fit loosely in these spaces; compatibility is based on packet size rather than a particular brand.
Recommended material: PLA for a dry cupboard or countertop at room temperature; PETG is also suitable. Keep all food sealed in its packaging. The organiser is intended to contact wrappers, with no intended direct food or water contact. Keep away from hot appliances and hand-clean if necessary.
Print at 100% scale in millimetres, flat base down in the supplied STL orientation. Suggested starting settings: 0.4 mm nozzle, 0.20 mm layers, 4 walls, 5 top/bottom layers and 15–20% infill. Designed to print without supports; inspect your slicer's preview and use your filament maker's profile. One connected piece; no assembly, moving parts or precision-fit joints.
AI-assisted CAD design. The exported mesh was checked digitally for a closed, connected surface and consistent face orientation. This design has not been physically printed or tested. The plain-background image is a render of the supplied model. The home scene is an AI concept illustration, not a photo of a printed sample; use the model render and STL for exact geometry. Props are not included. No measured performance, load rating, food-safety or dishwasher-safety claim is made.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
SachetSteps — Three-Tier Wrapped Tea & Sachet Organiser Entered in Home & Kitchen
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
HomeKitchenChallenge • PacketOrganizer • KitchenStorage
Counterleaf — 3-pocket sealed-packet sorter, 166 × 82 × 54 mm
sticker tool • label peeler • craft tool
PeelPilot | Three-Edge Sticker Backing Separator
HomeKitchenChallenge • bag holder • bag stand
BagBloom — One-Piece Bag-Opening Stand, 110 × 110 × 118 mm
FunctionalPrintsChallenge • parts tray • sorting tray
Comments