Description
Keep three groups of screws, beads or small workshop parts separate in a compact, three-lobed tray. Each well points its pouring notch in a different direction, 120 degrees apart. Turn the whole tray so the well you want to empty points down into a wide-mouth container, then tilt gently. The raised outlet sill helps retain parts while the tray sits flat; it is not a sealed closure. Keep other wells lightly filled when pouring and check the behaviour over a larger tray first.
Overall footprint: approximately 144.1 × 131.6 mm; height 19 mm. Walls are 2.8 mm nominal, base 3 mm, outlet notches 13 mm wide and their sills 9 mm above the underside. Central opening: 18 mm diameter. Intended for loose parts smaller than the outlet; not a size-sorting gauge or spill-proof container. PLA is recommended for dry, room-temperature use; PETG also works.
Concept inspiration: the general pouring-tray idea seen in Helena's Fast Funnel Tray V2 on MakerWorld. This new three-direction layout, raised fixed outlet sills and central grip were modelled independently; it has no removable gate. Source reference: https://makerworld.com/en/models/2221320-fast-funnel-tray-v2 (reviewed through Polyzon's indexed listing).
Print at 100% in millimetres, flat base down in the supplied orientation. Suggested starting settings: 0.4 mm nozzle, 0.20 mm layers, 4 walls, 5 top/bottom layers and 15–20% infill; use your filament maker's profile. Designed without supports. Each STL is one connected part with no assembly, moving parts, snap fits or precision-mating joints. All printed objects still have dimensional variation; inspect the slicer preview and your finished print before use.
AI-assisted original CAD, built from scratch in CadQuery. No third-party mesh, CAD file, photograph or text was reused. The exported STL passed digital checks for watertightness, connectivity and face orientation. A 0.20 mm layer-section check found no floating islands; this is a geometric check, not a physical print or a machine-specific sliced print profile. Neither printing nor real-world performance has been tested. Both listing images are renders of the actual supplied STL, not photos of printed samples. No load capacity, calibrated accuracy or guaranteed print success is claimed.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
TriPour Orbit — Three-Way Small-Parts Sorting & Pouring Tray Entered in Tools & Functional Prints
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
FunctionalPrintsChallenge • v cradle • dowel rest
SaddleBench — Twin V-Cradle & Parts Wells for Round Objects
FunctionalPrintsChallenge • brush rest • hobby tools
BrushHarbor — Six-Lane Brush Rest with Integrated Catch Tray
desk organizer • phone stand • cable guide
Comments