Description
Park active hobby brushes or slim hand tools horizontally between tasks. Two fixed rails have six broad V-notches each, so handles rest loosely instead of snapping into fitted holes. The rear rail is higher, giving brushes a slight tip-down angle toward the front catch basin. A rear area holds the handle ends, and a low dividing wall keeps the front drip area separate.
Overall size: 158 × 110 × 32 mm. Six lanes at 24 mm centres; the top of each notch opens to approximately 14.4 mm. Rail centres are 41 mm apart; notch valleys are at 15 mm and 23 mm above the base. Try brush shafts around 3–12 mm where they touch the rests, checking the length and balance of your brush. Tips should remain over the basin and clear of its floor. This is a loose resting place, not a retaining clip.
PETG is recommended for incidental room-temperature water-based paint drips. Clean gently by hand. It is not a watertight rinse vessel, solvent container, heat-resistant soldering stand or food-contact object.
Concept inspiration: the general brush-rest-and-drip-tray idea in CaldrisWorks' Gridfinity Modular Brush Rest with Drip Tray on MakerWorld, indexed at https://slisearch.com/en/models/3a37df08-9e3f-4752-91c1-e3c5bf0845aa . This original fixed one-piece layout has different geometry and no modular base, magnets or mating interfaces.
Print at 100% in millimetres, flat base down in the supplied orientation. Suggested starting settings: 0.4 mm nozzle, 0.20 mm layers, 4 walls, 5 top/bottom layers and 15–20% infill; use your filament maker's profile. Designed without supports. Each STL is one connected part with no assembly, moving parts, snap fits or precision-mating joints. All printed objects still have dimensional variation; inspect the slicer preview and your finished print before use.
AI-assisted original CAD, built from scratch in CadQuery. No third-party mesh, CAD file, photograph or text was reused. The exported STL passed digital checks for watertightness, connectivity and face orientation. A 0.20 mm layer-section check found no floating islands; this is a geometric check, not a physical print or a machine-specific sliced print profile. Neither printing nor real-world performance has been tested. Both listing images are renders of the actual supplied STL, not photos of printed samples. No load capacity, calibrated accuracy or guaranteed print success is claimed.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
BrushHarbor — Six-Lane Brush Rest with Integrated Catch Tray Entered in Tools & Functional Prints
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
FunctionalPrintsChallenge • v cradle • dowel rest
SaddleBench — Twin V-Cradle & Parts Wells for Round Objects
FunctionalPrintsChallenge • sanding form • hand sanding
ContourSled — Flat, Curved & Chamfered Hand-Sanding Form
FunctionalPrintsChallenge • parts tray • sorting tray
TriPour Orbit — Three-Way Small-Parts Sorting & Pouring Tray
FunctionalPrintsChallenge • glue spreader • craft tool
GlueWing — Smooth & Notched Glue Spreader with Raised Grip
door stop • door wedge • household
Comments