Description
A compact sanding form for light manual finishing. Choose the wide flat sole for flat surfaces, the rounded shoulder for broad concave surfaces, or the chamfered shoulder for narrower access. Apply adhesive-backed abrasive to one working face at a time, or secure an ordinary abrasive strip with suitable double-sided tape. There are no tightening screws, clips or thin clamping slots. Abrasive and tape are not included.
Overall size: 48 × 102 × approximately 29.3 mm. The flat sole is 48 × 102 mm. The diagonal side face is approximately 18.4 mm wide before the upper transition; the opposite shoulder is smoothly curved, not a calibrated radius gauge. Trim abrasive flush with the working face and press it down fully. Start with light pressure and verify that the abrasive stays attached.
PETG is the recommended starting material; PLA may suit light, dry hand finishing at room temperature. Stop if the form warms or deforms. This is not for powered sanding, sanding belts, wet service or precision surface calibration.
Concept inspiration: the broad idea of shaped sanding blocks, as seen in RBrayWood's Sanding Block Tool Set With Storage on MakerWorld, indexed at https://slisearch.com/en/models/a3da0ad6-0348-4f56-a6ef-4a3eeb563326 . This new asymmetric three-surface body is original CAD and uses surface adhesion instead of a fitted tensioner or clamp.
Print at 100% in millimetres, flat base down in the supplied orientation. Suggested starting settings: 0.4 mm nozzle, 0.20 mm layers, 4 walls, 5 top/bottom layers and 15–20% infill; use your filament maker's profile. Designed without supports. Each STL is one connected part with no assembly, moving parts, snap fits or precision-mating joints. All printed objects still have dimensional variation; inspect the slicer preview and your finished print before use.
AI-assisted original CAD, built from scratch in CadQuery. No third-party mesh, CAD file, photograph or text was reused. The exported STL passed digital checks for watertightness, connectivity and face orientation. A 0.20 mm layer-section check found no floating islands; this is a geometric check, not a physical print or a machine-specific sliced print profile. Neither printing nor real-world performance has been tested. Both listing images are renders of the actual supplied STL, not photos of printed samples. No load capacity, calibrated accuracy or guaranteed print success is claimed.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
ContourSled — Flat, Curved & Chamfered Hand-Sanding Form Entered in Tools & Functional Prints
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
FunctionalPrintsChallenge • brush rest • hobby tools
BrushHarbor — Six-Lane Brush Rest with Integrated Catch Tray
FunctionalPrintsChallenge • v cradle • dowel rest
SaddleBench — Twin V-Cradle & Parts Wells for Round Objects
FunctionalPrintsChallenge • glue spreader • craft tool
GlueWing — Smooth & Notched Glue Spreader with Raised Grip
MacBook stand • vertical laptop stand • MacBook Air
Comments