Description
A broad bench rest for light round objects during inspection, hand marking or dry assembly. Two aligned open V-cradles support a dowel, tube or cylindrical handle at two points; side pockets keep loose fasteners close. There are no fitted bore sizes, clamps or brand-specific mounts.
Overall size: 148 × 116 × 43 mm. The two cradle slabs are 12 mm thick with 70 mm centre spacing. Their valleys sit 12 mm above the base and each usable V opens to about 62 mm across at the top. As a starting range, try light objects roughly 8–50 mm in diameter and long enough to span both cradles, checking balance by hand. Each side pocket has about 25.4 × 88.4 mm of open internal space.
PLA is recommended for a stiff, dry bench accessory; PETG is an alternative. This is an untested positioning rest, not a clamp, lifting support, machine fixture or calibrated V-block. Do not use it to secure work for powered cutting or drilling.
Concept inspiration: the general open V-support principle represented by Precision Angle V-Blocks / Multi Angle Supports on MakerWorld, referenced by Flynndogg Woodwork: https://makerworld.com/en/models/1073912-precision-angle-v-blocks-multi-angle-supports . This new twin-cradle body and its side pockets were modelled independently; no source geometry was used.
Print at 100% in millimetres, flat base down in the supplied orientation. Suggested starting settings: 0.4 mm nozzle, 0.20 mm layers, 4 walls, 5 top/bottom layers and 15–20% infill; use your filament maker's profile. Designed without supports. Each STL is one connected part with no assembly, moving parts, snap fits or precision-mating joints. All printed objects still have dimensional variation; inspect the slicer preview and your finished print before use.
AI-assisted original CAD, built from scratch in CadQuery. No third-party mesh, CAD file, photograph or text was reused. The exported STL passed digital checks for watertightness, connectivity and face orientation. A 0.20 mm layer-section check found no floating islands; this is a geometric check, not a physical print or a machine-specific sliced print profile. Neither printing nor real-world performance has been tested. Both listing images are renders of the actual supplied STL, not photos of printed samples. No load capacity, calibrated accuracy or guaranteed print success is claimed.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
SaddleBench — Twin V-Cradle & Parts Wells for Round Objects Entered in Tools & Functional Prints
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
FunctionalPrintsChallenge • brush rest • hobby tools
BrushHarbor — Six-Lane Brush Rest with Integrated Catch Tray
FunctionalPrintsChallenge • parts tray • sorting tray
TriPour Orbit — Three-Way Small-Parts Sorting & Pouring Tray
FunctionalPrintsChallenge • glue spreader • craft tool
GlueWing — Smooth & Notched Glue Spreader with Raised Grip
FunctionalPrintsChallenge • sanding form • hand sanding
Comments