Description
Spread a small amount of room-temperature water-based craft or wood glue with the smooth front edge, or turn the tool around to leave coarse parallel glue ridges with its notched edge. A raised central grip keeps fingers above the working sheet. Rounded side corners and a generous hanging hole make it easy to park between uses.
Overall size: 112 × 72 × 10.5 mm. The main sheet is 3 mm thick, tapering toward a roughly 1.2 mm front tip. The opposite edge has 3 mm wide notches at 6 mm pitch across the central 75 mm; the notch depth is 3 mm. The raised grip is 74 × 11 mm, with shallow texture. Hanging hole: 9 mm. These dimensions describe the geometry, not a controlled glue-film thickness.
PETG is recommended. Check your adhesive maker's instructions for plastic compatibility and clean before glue cures. Intended for light spreading, not scraping blades, prying, hot glue, solvent application or calibrated adhesive coverage.
Concept inspiration: the general dual-edge spreader idea represented by Glue/Paint dual spreader/spatula (parametric) on MakerWorld, indexed at https://3dgo.app/models/makerworld/538188 . This broad paddle, raised grip, tooth pattern and blade taper were modelled independently; no source files were reused.
Print at 100% in millimetres, flat base down in the supplied orientation. Suggested starting settings: 0.4 mm nozzle, 0.20 mm layers, 4 walls, 5 top/bottom layers and 15–20% infill; use your filament maker's profile. Designed without supports. Each STL is one connected part with no assembly, moving parts, snap fits or precision-mating joints. All printed objects still have dimensional variation; inspect the slicer preview and your finished print before use.
AI-assisted original CAD, built from scratch in CadQuery. No third-party mesh, CAD file, photograph or text was reused. The exported STL passed digital checks for watertightness, connectivity and face orientation. A 0.20 mm layer-section check found no floating islands; this is a geometric check, not a physical print or a machine-specific sliced print profile. Neither printing nor real-world performance has been tested. Both listing images are renders of the actual supplied STL, not photos of printed samples. No load capacity, calibrated accuracy or guaranteed print success is claimed.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
GlueWing — Smooth & Notched Glue Spreader with Raised Grip Entered in Tools & Functional Prints
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
FunctionalPrintsChallenge • v cradle • dowel rest
SaddleBench — Twin V-Cradle & Parts Wells for Round Objects
FunctionalPrintsChallenge • sanding form • hand sanding
ContourSled — Flat, Curved & Chamfered Hand-Sanding Form
FunctionalPrintsChallenge • parts tray • sorting tray
TriPour Orbit — Three-Way Small-Parts Sorting & Pouring Tray
FunctionalPrintsChallenge • brush rest • hobby tools
Comments