Description
An original one-piece countertop organizer for three groups of sealed tea, sugar or similar dry packets. Its scalloped front gives finger access; rounded outer corners and two shallow skids per pocket keep the design simple and useful.
Dimensions: 166 × 82 × 54 mm. Three clear pocket envelopes approximately 51.33 × 76 × 51 mm before the 2 mm floor skids; rounded internal corners reduce the local envelope. Measure actual packets before printing. Walls/dividers and floor are 3 mm.
Recommended starting settings (untested): PLA, 0.4 mm nozzle, 0.2 mm layers, 3 perimeters, 15% infill. Flat base down at Z=0, 100% millimetre scale. No supports intended; inspect a slicer preview before printing.
Validation: the delivered STL was re-imported and checked for watertight topology, consistent winding, positive volume, a single connected body, exact bounds and nondegenerate faces. Wall/floor and nominal packet clearances were checked analytically. These are virtual geometry checks, not slicer or physical tests.
Digital prototype only. All images are mesh renders, not print photographs. No physical print or real packet fit test was performed. Intended only for sealed packets in dry, room-temperature indoor use; no direct food/water contact or food-safe/dishwasher/heat/liquid-tight claim.
Commissioned by Anıl Göktaş. Concept, parametric CAD code, mesh validation, renders and documentation prepared by AI assistants. No third-party model, logos or characters used.
#HomeKitchenChallenge #PacketOrganizer #KitchenStorage #AIAssisted
This model is licensed under
Creative Commons Attribution
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Counterleaf — 3-pocket sealed-packet sorter, 166 × 82 × 54 mm Entered in Home & Kitchen
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
HomeKitchenChallenge • tea organiser • sachet holder
SachetSteps — Three-Tier Wrapped Tea & Sachet Organiser
FunctionalPrintsChallenge • parts tray • sorting tray
TriPour Orbit — Three-Way Small-Parts Sorting & Pouring Tray
DeskOrganizersChallenge • DeskOrganizer • PenHolder
Comments