Description
Every camp kitchen has the same problem: the spatula, the tongs and the dish towel end up on the ground or at the bottom of a bin. This hook clips onto any flat edge and keeps the things you reach for most at hand height. No screws, no tools, prints flat without supports.
What is included
- edge_hook.scad - parametric OpenSCAD source
- edge_hook_6mm.stl - thin aluminium roll-top tables and sheet-metal shelves
- edge_hook_18mm.stl - 3/4 inch plywood chuck boxes and most folding tables
- edge_hook_25mm.stl - thick moulded case lids and bench tops
Parameters: edge_thickness (3-45 mm), grip_depth, hook_opening, hook_depth, hook_lip, wall, width, grip_bump, clearance. Measure your edge with calipers, enter the number, render, print. If the fit is tight, raise clearance by 0.2 mm.
Print settings: lay the part on its side (as exported), no supports. PETG or ASA recommended - PLA softens in a hot car or next to a stove. 0.2 mm layers, 4 perimeters, 30% infill.
Load and safety: light-duty hook for utensils, mugs, towels and small lanterns. It has not been load tested - try it with your own gear first and raise wall and width for heavier items. Keep it at least 30 cm from a burner.
The 18 mm and 25 mm versions were sized with case-style kitchens in mind, such as the VOZ Camp Kitchen - check your own lid thickness before printing. The image is a render of the model; designed with AI assistance in OpenSCAD.
This model is licensed under
Creative Commons Attribution-ShareAlike
Clip-On Edge Hook for Camp Tables and Chuck Boxes (Parametric) Customizable
Print Profiles
+Show Print ProfilesDiscussed in
Similar models
FunctionalPrintsChallenge • sanding form • hand sanding
ContourSled — Flat, Curved & Chamfered Hand-Sanding Form
FunctionalPrintsChallenge • brush rest • hobby tools
BrushHarbor — Six-Lane Brush Rest with Integrated Catch Tray
FunctionalPrintsChallenge • v cradle • dowel rest
SaddleBench — Twin V-Cradle & Parts Wells for Round Objects
FunctionalPrintsChallenge • glue spreader • craft tool
GlueWing — Smooth & Notched Glue Spreader with Raised Grip
HomeKitchenChallenge • drying rack • draining tray
DryNest — Open-Bar Draining Tray for Sponges & Small Items
Customize “Clip-On Edge Hook for Camp Tables and Chuck Boxes (Parametric)”
Adjust the parameters, then download your version. Everything renders in your browser.
Rendered locally with OpenSCAD — your settings never leave this page.
Comments