Description
Clip this over the trailing edge and it holds the surface at neutral while you set up linkages or center servos. Also works as a gust lock when the plane is riding in the car.
The fork has a V seat that sits on the trailing edge and two pads that rest on the fixed surface just ahead of the hinge. It springs open a little to go on, then holds the surface on its mid-thickness line.
Sizes in the files:
- small, for chords up to about 35 mm
- medium, up to about 70 mm (119 x 11 x 12 mm, the 3mf has two on the plate)
- large, up to about 120 mm
Print it flat in PETG with 4 walls and 100% infill. PLA will take a set if it sits clamped in a hot car. Red or orange is a good idea, and there's a 5 mm hole for a streamer.
It has REMOVE BEFORE FLIGHT pressed into the top and I mean it. Do not fly with it on.
Haven't printed these yet. The spring strain (about 1.2%) and pad force (a few newtons) are worked out on paper, not measured, and I don't know yet how much PETG creeps if it stays on for weeks. It also centers on mid-thickness, so it won't hold reflex or droop.
This model is licensed under
Creative Commons Public Domain
This licence allows derivative works. Open it in a tool to build on it — credit is filled in for you when you publish.
Comments