Description
DepthLock is a prototype bridge gauge with a square probe and removable taper key. Lower the probe to a recess floor, press the key down beside it to retain the position, then pull the key up to release. Nominal reading range: 0-80 mm. Scale marks are spaced at 5 mm, with longer marks every 10 mm. Read at the top face of the bridge.
Prototype status
This model has not been physically printed or tested. Digital mesh and stationary assembly checks passed, but grip, calibration, insertion travel and release force remain unverified. The scale is a coarse guide, not a verified precision measurement. Images are illustrative product renders and CAD views, not photographs of physical prints. Use the supplied CAD files for exact geometry.
Files and dimensions
The ZIP contains three component STLs, an assembly STEP, validation notes and a print-test checklist. Units are millimetres. Bridge: 100 x 20 x 16 mm. Probe: 6 x 6 x 100 mm. Guide opening: 9.5 x 6.6 mm, including key space. The key tapers from 2.2 to 4.4 mm over 22 mm.
Suggested starting print settings
PLA or PETG, 0.4 mm nozzle, 0.20 mm layers, 3 walls and 20% infill. Print the bridge with its continuous upper face on the bed and feet upwards. Lay the probe and key on their broad sides. Components are exported in assembly positions: orient and place each separately on the bed. Inspect the taper and scale in the slicer. These settings are untested.
Assembly and use
Insert the probe and then the narrow end of the key beside it. Place the feet on the reference surface, lower the probe and press the key down gently. Read at the bridge top. Pull the key head upwards to release. Confirm zero and known depths before relying on any reading.
AI assistance: concept development, CAD, digital checks and listing text were prepared with AI assistance. No physical testing is claimed.
This model is licensed under
Creative Commons Attribution-NonCommercial-NoDerivs
Discussed in
Similar models
FunctionalPrintsChallenge • sanding form • hand sanding
ContourSled — Flat, Curved & Chamfered Hand-Sanding Form
FunctionalPrintsChallenge • glue spreader • craft tool
Comments