About this video
A one-of-a-kind vase in your browser
The video starts from the Twisted Tower preset in PrintPal's Vase Generator and reshapes it into a 160 mm copper vase with an S-curve body, a half-turn twist and a wavy rim. Every change shows up live in the 3D preview, a built-in print check flags problems before you slice, and the STL downloads straight away. The tool is free, with no signup and no limits.
The 10 steps
| Step | What to do | In the video |
|---|---|---|
| 1 | Start from a preset | Twisted Tower, or hit Surprise Me for a random design |
| 2 | Drag any slider to reshape it | Height lowered from 200 to 160 mm |
| 3 | Swap the cross-section | From a hexagon to a diamond profile |
| 4 | Dial in the twist | 180° total, half a turn from base to rim |
| 5 | Add a wavy rim | Ruffle waves raised from 0 to 5 |
| 6 | Pick a color and finish | Copper with the Silk finish |
| 7 | Spin it to see every angle | A full spin of the finished design |
| 8 | Read the print check | "No print issues detected" |
| 9 | Download the STL | 15.5 MB |
| 10 | Slice it and print | PLA on a textured PEI plate |
The color and finish only change the preview. The STL has no color, so use them to see how the vase will look in the filament you plan to print with.
The settings that matter
| Section | What you can change |
|---|---|
| Body and silhouette | Height, bottom and top diameter, wall and base thickness, and 19 silhouettes from teardrop and jar to amphora and S-curve |
| Cross-section and twist | 19 profiles or your own SVG, a twist of up to two full turns, and swirling body lobes |
| Ribs, fins and lattice | 2 to 240 vertical or helical ribs with sharp, rounded or flat profiles, or a crossing-helix lattice |
| Organic shape | Soft pillowy bulges or creased silk folds |
| Surface texture | Rings, wavy, honeycomb, knurled, dragon scales, hammered, twisted rope, bark and more |
| Rim | Flare it outward, cut it at a slant or ruffle it with waves |
The video's vase is a Hollow Shell with 2 mm walls and a 2 mm base, 56 mm across at the bottom and 76 mm at the top.
Reading the print check
| Check | In the video | What it tells you |
|---|---|---|
| Dimensions | 75 mm Ø × 160 mm tall | The size of the finished print |
| Est. weight (PLA) | About 84 g | How much filament it uses |
| Body overhang | 29° | How far the walls lean. Lower angles are easier to print without supports |
| Rib pitch (tightest) | 2.05 mm | The smallest gap between neighboring fins |
| Relief depth | 1.2 mm | How far the ribs stand out from the body |
| Triangles / STL size | 325,248 / 15.5 MB | How detailed the mesh is |
Rib pitch is the one to watch on finned designs. Keep it above roughly 1.6 mm, about two nozzle widths, so neighboring fins print as separate ribs instead of merging. The tool page suggests 100 to 160 fins as a sweet spot on a 90 mm vase.
Vase mode or a hollow shell
Vase mode (Spiralize Outer Contour in the slicer) prints the whole vase as one continuous spiral with no seam. Use the Solid model style for it. Slanted or ruffled rims like the one in this video need the Hollow Shell style with normal slicing instead, so the top stays open. Day 4 of our beginner series covers spiral vase mode in the slicer.
Making it hold water
Use the Hollow Shell style, print with 2 to 3 walls instead of vase mode, and use PETG. A thin coat of clear epoxy inside seals it further. PLA is fine for dry flowers and decoration.
Ideas to try
- Swirl Fins preset. 120 sharp fins over a lobed, twisted body. Print it in matte or sand PLA with 2 walls and 0 top layers.
- Ribbed planter with a smooth foot. Start the ribs or lattice at 15% of the height so they float above a plain band, and set the base to 0 for drainage.
- Your own profile. Click Import SVG Profile to use any shape as the cross-section, or draw a silhouette with the custom curve editor.
More vase videos
- Create a custom vase you can 3D print, including selling custom vases.
- 3D print a custom vase without designing, the 10-second version.
- Prefer to describe it in words? The AI 3D model generator can make a vase from a prompt.
FAQ
Is the vase generator free?
Yes. It runs entirely in your browser with no signup, no upload and no limits.
What is vase mode?
A slicer setting, Spiralize Outer Contour, that prints the vase as one continuous spiral with no seam. Use the Solid model style for vase mode, and Hollow Shell for slanted or ruffled rims.
How many fins can I print?
Keep the tightest rib pitch above roughly 1.6 mm so the fins stay separate. 100 to 160 fins on a 90 mm vase works well.
Can a 3D printed vase hold water?
Yes, with the Hollow Shell style, 2 to 3 walls and PETG. Add a thin coat of clear epoxy inside for a better seal.
Can I import my own shape?
Yes. Import an SVG to use as the cross-section, or draw your own silhouette with the custom curve editor.
Does the color I pick export with the STL?
No. The STL is a single-color model. The color and finish only change the preview.
How to 3D print a custom MX fidget clicker
Autoplay paused while you read — scroll back up to continue
How to 3D print a custom vase
Design a one-of-a-kind vase in your browser. Start from a preset, reshape it with sliders, twist it, add a wavy rim, check it for print issues and download the STL. Free, no signup.
Featured in this video